Iron-on cotton patch. Various shapes can be cut from the fabric. The adhesive layer is made of polyethylene. The patch is suitable for covering holes on jackets, jeans, trousers, overalls, work clothes, etc.
Instructions for use:
- Place the base material on a flat, heat-resistant surface;
- Remove the protective paper from the patch (if any);
- Place the patch with the shiny adhesive side onto the fabric in the selected position;
- The adhesive side must lie flat against the base fabric. Make sure the patch is not crooked;
- Heat the iron. Turn it to the hottest setting suitable for the base material. Make sure the "steam" option is off and your iron is not full of water;
- Place a thin towel or heat-resistant paper over the patch. Be careful not to move the patch. The towel will protect the patch itself and the base surface from heat;
- Place the iron on the patch and towel, pressing lightly for about 15 seconds. Remove the iron and let the patch cool;
- Lift the towel and check if the patch is securely fastened by gently lifting its edge with your finger. If it lifts slightly, place the towel back over it and press it with the iron again for 10 seconds.
We recommend sewing the patch on to prevent it from peeling off after washing.
Price is for one patch.
Care:
– Wash up to 60º C
– Do not bleach
– Professional dry cleaning
– Iron at high temperature
– Do not tumble dry
Categories: cotton patch, sewing
The color of the product may differ slightly from the one shown in the picture, depending on the technical color and brightness settings of your computer or smart device screen.
Product offerings and prices in the online store and in physical stores may vary. If you wish to inquire about product availability in stores, please contact the online store's customer consultant – tel. 29 333 505, e-mail info@kameja.lv, or the relevant Kameja store.
If you need a larger quantity of the product than indicated in the online store, please contact us to arrange an individual offer.
