Round iron-on patch made of cotton. The adhesive layer is made of polyethylene. The patches are suitable for covering holes on jackets, jeans, trousers, overalls, work clothes, etc.
The price is per patch.
Categories: patch, sewing, materials for needlework
The color of the product may differ slightly from the image, depending on the technical color and brightness settings of the computer or smart device screen.
The product range and prices in the online store and in stores may differ. If you would like to find out about the availability of products in stores, please contact the online store customer consultant – tel. 29 333 505, e-mail info@kameja.lv , or the relevant Kameja store.
Instructions for use:
- Place the base material on a flat, heat-resistant surface;
- Remove the protective paper from the patch (if any);
- Place the patch with the shiny adhesive side on the fabric in the chosen position;
- The adhesive side should be flat against the base fabric. Make sure the patch is not crooked;
- Preheat your iron. Turn it to the hottest setting appropriate for the base material. Make sure the “steam” option is off and that your iron is not full of water;
- Place a thin towel over the patch. Be careful not to move the patch. The towel will protect the patch and the underlying surface from the heat;
- Place the iron on the patch and towel, applying light pressure for about 15 seconds. Remove the iron and let the patch cool;
- Lift the towel and check that the patch is securely attached by gently lifting the edge with your finger. If it lifts slightly, flip the towel over and press it down with the iron again for 10 seconds.
We recommend sewing the patch on to prevent it from peeling off after washing.
